Skip to content

RFID Zapper

Passive RFID chips are embedded in passports, credit cards, retail clothing tags, and transit cards. You may not want these items constantly broadcasting a unique ID to any scanner you walk past.

The RFID Zapper uses the flash capacitor from a disposable camera connected to a copper coil. When triggered, it induces a massive voltage spike in the target RFID chip’s antenna, permanently frying the silicon logic gate.

1. **Charge:** Press the charge button until the neon indicator lamp glows solid (approx 300V). 2. **Position:** Place the target card/tag directly against the copper coil. 3. **Discharge:** Press the trigger button. You may hear a small "pop". 4. **Verify:** Use your smartphone's NFC reader to confirm the chip is dead.