Skip to content

Smart-Dust Sweeper

The Smart-Dust Sweeper is a specialized electrostatic broom and vacuum mechanism designed to collect and neutralize micro-scale IoT sensors (“smart dust”) that may have been deployed in your environment.

As corporate and state actors increasingly deploy microscopic, distributed sensory networks, traditional sweeps (like RF foxhunts or camera censuses) are becoming insufficient. The Sweeper utilizes a combination of electrostatic attraction, targeted localized EMP bursts, and physical containment to safely clear an area of smart dust.

  1. Electrostatic Accumulation: The sweeping head generates a highly localized electrostatic field, causing micro-sensors (which typically rely on minimal static charges to adhere to surfaces) to detach and cling to the sweeping bristles.
  2. Containment: The vacuum mechanism pulls the collected dust into a shielded Faraday chamber.
  3. Neutralization: Once in the chamber, the device can optionally trigger a localized, low-yield EMP to permanently disable the logic boards and transmitters of the collected sensors.
  • Routine Sweeps: We recommend sweeping high-risk areas (doorways, windowsills, air vents, and electronics racks) at least once a week.
  • Post-Intrusion: If you suspect an unauthorized entry or have received a suspicious package, perform a deep sweep of the entire room.
  • Maintenance: The Faraday containment chamber should be emptied into a secure, shielded disposal bag. Do not empty it into a standard trash bin, as some sensors may survive the neutralization process and continue transmitting from the landfill.
  • 1x High-voltage electrostatic generator module (salvaged from air purifiers)
  • 1x Handheld vacuum assembly
  • Copper mesh (for Faraday containment lining)
  • Carbon fiber bristles
  • 1x Micro-EMP capacitor bank

Note: See the full assembly guide in the fabrication/ directory for detailed instructions on building the EMP chamber safely.