Skip to content

Laser Mic Defeater

A Laser Microphone works by shining an invisible infrared laser at a window and reading the microscopic vibrations caused by sound waves (speech) inside the room.

The Laser Mic Defeater relies on piezoelectric transducers attached directly to the window glass to induce chaotic vibrations, completely destroying the signal recovered by the laser.

1. **Prepare the glass:** Clean the window surface thoroughly with isopropyl alcohol. 2. **Apply the transducers:** Use double-sided acoustic mounting tape to affix the piezoelectric disks. Place one disk per 2 square meters of glass. 3. **Wire the array:** Connect the disks in parallel to the Defeater control box. 4. **Tune the noise:** Power on the device. Adjust the 'Chaos' dial until you can faintly hear the glass resonating with white noise.

When properly tuned, the transducers vibrate the glass with an amplitude 10x to 50x greater than human speech. Because the noise is generated at the boundary (the glass itself), the laser cannot mathematically separate the internal speech from the injected noise.