Skip to content

BLE Tracker Sweeper

Bluetooth Low Energy (BLE) trackers like Apple AirTags, Tile, and SmartTags are increasingly used for stalking and unwanted tracking. While smartphone operating systems have built-in alerts, they are often delayed or easily bypassed by removing the tracker’s internal speaker.

The BLE Tracker Sweeper is a dedicated ESP32-based hardware device that scans for recurring BLE MAC addresses following you over time, calculating signal strength (RSSI) to physically locate the hidden tracker.

1. **Initialize:** Turn on the Sweeper in a known safe location (e.g., inside your home). It will whitelist all stationary beacons in the vicinity. 2. **Travel:** Carry the Sweeper with you in your car or bag. 3. **Detection:** If a non-whitelisted BLE MAC address stays within range for more than 15 minutes while you are moving, the Sweeper alerts you. 4. **Localization:** Switch to "Foxhunt Mode" and use the directional antenna and RSSI graph on the OLED display to zero in on the physical tracker.